IPV D2 75 W
IPV D2 75 W

New and fantastic IPV D2 Box Mod is finally here!
IPV D2 Box Mod is an amazing box mod from Pioneer4you Company. IPV D2 Box Mod is the newest in the market with extremely a wonderful features. This product has a temperature control capabilities with more wattage power and a low atomizer resistance.
You can use a 18650 battery that is easy to remove and replace back. It is held in place by a slide door that is easy to open and close too. This digital mod has the ability to produce 75 watts when set at the standard mode and 50 joules when set at the temperature control mode.
The vape mod has the ability to operate under temperatures ranging at 200 degrees Fahrenheit to 580 degrees Fahrenheit. For the temperature to be well controlled, there has to be nickel coils installed, which is the case with this mod.
IPV D2 box mod also uses the Li-ion cells which have to be charged with a lot of care as they can easily blow up if they are not well taken care of. Great new feature that you can charge your battery while it is in the D2, and also you can continue to vape while your D2 is charging. IPV D2 Box Mod is a bit smaller than IPV Mini.
You won’t be disappointed with this product!

IPV D2 75 W Features
– Black Billet Aluminum Body
– Temperature Control Functionality
– Powered by a Single 18650 Battery (Batteries not Included)
– Sliding Ball Bearing Battery Door
– Output Wattage: 7w-75w
– Output Joules: 5j-50j
– Standard Resistance: 0.2 ohm-3.0 ohm
– Joule Resistance: 0.05 ohm-0.3 ohm
– Temperature Range: 200-580 F
– Spring Loaded 510 Contact Pin
– USB Charging Port

Specifications
– Vaporizer Type: Portable Pens, Battery, Oil Pens
– Material: Aluminum
– Depth: 23 mm
– Height: 78 mm
– Width: 40 mm
– Product weight: 180 g

Compatibility
– 510 threading connection

What does the IPV D2 75 W Includes?
1 x iPV D2 75W Mod
1 x USB Charging cable
1 x Manual
90 Days Warranty

not rated $86.99 Add to cart
IPV D3 80W TC Box Mod
IPV D3 80W TC Box Mod

The iPV D3 80W TC Box Mod is the new product from the Pioneer4you family, specifically an upgrade from the popular iPV D2 Mod with a fully integrated system utilizing the latest YiHi Chipset, SX 130H-V2.
Featuring up to 80 watts of variable output and a minimum atomizer resistance of 0.05ohm, the iPV D3 has implemented an improved temperature module to support Ni200 Nickel and Titanium, providing fantastic performance with a wide range of commonly utilized heating elements and compatibility with today’s top tanks.
You will need a single 18650 battery that powers the iPV D3.
This product has a beautiful design and you won’t be disappointed!

Features:
– 18650 High Amp IMR Single Battery – Sold Separately
– Latest YiHi SX 130H-V2 Chipset
– Wattage Output Range: 7~80W
– Voltage Output Range: 1~7V
– Output Joules: 10~75J
– Min VW Atomizer Resistance: 0.15 ohm
– Min TC Atomizer Resistance: 0.05 ohm
– Temperature Control Range: 212-572F
– Compatible with Ni200 and Ti Heating Elements
– Superior Aluminum Construction
– Magenetized Battery Cover
– Intuitive LED Display
– Step Down Voltage Technology
– Low Voltage Protection
– Low Resistance Protection
– High Input Voltage Warning
– Output Short Circuit Protection
– Reverse Battery Protection
– Temperature Overheat protection
– MicroUSB Charging Port
– Spring Loaded 510 Contact

What does the IPVD3 80W TC Box Mod Includes?
1 x IPV D3 TC 80W TC Box Mod
1 x MicroUSB Charger
1 x Instruction Manual

not rated $71.95 Add to cart
IPV4S 120 Watt Box Mod
IPV4S 120 Watt Box Mod

We would like to introduce you a new IPV4 120 Watt Box Mod.
The brand new IPV4 120W Box Mod is the regulated box mod by Pioneer4you. This product has a very unique design and it comes in two colors: black and silver. This box mod has a great features that were lacking in the IPV2 & IPV3. New IPV4 is a great addition to the IPV collection.
The IPV4 features an upgraded Yihi chip with 120w and temperature capabilities. It takes two 18650 batteries and features an all new battery door held in place by ball bearings to make switching batteries much easier. This mod can read resistances down to 0.1 ohms and will automatically calculate the voltage of the circuit as you adjust the wattage.
You won’t be disappointed with this product!

Features
– Yihi SX330 V3C chip
– Aluminum body with custom milled display screen
– Spring loaded contact pin
– Resistance reads down to 0.1 Ω
– Resistance reads up to 3.0 Ω
– Adjustable wattage: 5W-120W
– Output voltage: 1.0V – 7.5V
– Supported pass through mod
– 2 18650 batteries
– Magnetic door
– Auto ohm resistance meter
– Voltage is calculated automatically as wattage is adjusted
– Mini USB interface charging port

Specifications
– Wattage: 5W-120W
– Output Voltage: 1.0-7.0 Volts
– Input Voltage: 6.2-8.5 Volts
– Resistance: 0.1Ω-3.0Ω
– Input Current: 1.3A-25A
– Output Current: 35A

Compatibility
Compatible with 18650 batteries

What does IPV4 100 Watt Box Mod Includes?
1 x IPV4 Box Mod
1 x Instruction Leaflet
3 Month Warranty

not rated $149.99 Add to cart
IPV5 Box Mod
IPV5 Box Mod

The IPV5 Box Mod is compatible with multiple coil types including Ni200 Nickel, stainless steel wire and Titanium. Released in 4 flashy colors, black, white, stainless, and blue the IPV features curved edges to better fit in a pocket or bag. The IPV 5 is a 200W box mod that is 18650 compatible and 510 threaded.
TANK & BATTERIES NOT INCLUDED

The IPV5 Box Mod Features…
– 200 Watts
– 4 Flashy Colors
– Temperature Controls
– Low Voltage Protection

The IPV5 Box Mod uses 2 18650 batteries and has an adjustable temperature from 212F to 575F.

The IPV5 Box ModTC Includes…
1 x iPV5 200W TC Mod
1 x USB Micro Cable
1 x User guide

Warranty…
Limited manufacturer’s warranty on material defects or workmanship.

not rated $58.95 Add to cart